Adhesion Tester

Adhesion Tester

The Adhesion Tester will measure the adhesion bond strength of applied coatings on flat and curved surfaces by the tensile pull on a Dolly glued to the coating.

Adhesion Tester models: X1003 Standard 0–3500psi (0–25MPa) and X1004 Right Angle 0–3500psi (0–25MPa) for testing the adhesion of coatings inside pipes with a minimum diameter of 150mm (6”).

Supplied in an industrial Carrying Case with 5 Flat Dollies, Turbo Fuse Adhesive, Dolly Cutter, Heated Dolly Remover, Dolly Cleaning Tool, Dolly Plug.

Piyush Technologies offer Adhesion Tester.

The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point-loading of the force.

The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.

Gauge accuracy ±1%FSD.